.

Sunday, December 8, 2013

Spring System

Introduction This constitute/mass system experiment discusses the behaviour of springs in static and dynamic situations. By measuring the callousness of polar springs allows the basics of Hookes Law to be understood. The simple cerebration of Hookes fair play is applying a encumbrance to the spring resulting in the system world kept in equilibrium. As capacious as the weight does not exceed the elastic lay of the spring, then the comparison states the like: F=K ?x Where F is the compact exerted on the spring, K is the force eonian and ?x is the excision of the spring. In addition to this, by cypher the frequency of the oscillation, there is some other formula states like: T2= (0.5 / ?) x ? (K/ M) Where K is the cruelness of the spring and M is the disposed mass. Aims and Objectives 1. exert the dwelling housement of spring when applying force on it. 2. using up the apparatus and determine the stiffness of both different springs by exert ing the same weights. 3. come out both springs in reduplicate and discuss the force constant. 4. Use the same devil springs and place them in series, measure the force constant and equal the results from mode 2. 5. Use the oscillating method and determine the beat interpreted and compare the results with the theoretical value. Methodology 1.
Order your essay at Orderessay and get a 100% original and high-quality custom paper within the required time frame.
Simply compare the stiffness of the two springs by hand. Record the initial position when it is respite system on the stand. Apply weights of 5, 7, 9, 11, 13 and 15N apiece to the spring. Observe the displacement and determine the stiffness of the spring K1 from basic Hookes law. 2. take in the other spring; repeat the same process as method 1. Record the individual force co! nstant as K2. 3. Place the same two springs in parallel. Apply weights of 10, 20, 30, 40, 50 and 60N separately across the two springs. Record the stiffness of the springs individually. gibe to Hookes law, Keq=K1+K2. Use the results from procedure 1 and 2 and determine the results. analyze the two results and plot a graph comparing load...If you essential to know a full essay, order it on our website: OrderEssay.net

If you want to get a full information about our service, visit our page: write my essay

No comments:

Post a Comment